One Sheet Wonder Beautiful Promenade #3 in Series

I decided to try a "One Sheet Wonder" sort of.... I basically hand stamped my own Designer Series Paper by stamping the flowers and leaves  from the Beautiful Promenade Stamp Set in Petal Pink, Sahara Sand and Pear Pizzazz. I just really love light, pastel colors. I used an 8 1/2" X 11" Very Vanilla Cardstock plus Petal Pink Cardstock for backings and card bases. Added in some Framelit Dies, Punches, Tufted Embossing Folder and embellishments... and that's it! If you like you could stamp an image or sentiment on the inside and decorate the envelopes for a beautifully coordinating gift set.  I did five cards in the video and I have a couple more to add to this blog post for the 3rd  video in my series on the Petal Promenade Suite.

I cut the 8 1/2" X  11" Cardstock as follows but I cut some pieces smaller than  pattern...These measurements are just an idea to follow...Have fun. some

Video Tutorial

Card #1

8 1/2" X  5 1/2" Petal Pink Cardstock Card Base

4"  X  5 1/4" Very Vanilla Cardstock (= Card Front - Use Tufted Embossing Folder on it)

One Diagonal Cut Piece from your DSP

One diagonal cut Petal Pink Cardstock (Slightly larger than DSP) also cut one scalloped circle from the middle.

Scrap of very vanilla - cutor punch oval and stamp sentiment to layer with scallop above

To put card together (Follow Video Instruction)

You can add ribbon and a bow across diagonally cut DSP before adhering to embossed vanilla card front if you like and gems or pearls for added bling.

Card #2

8 1/2" X  5 1/2" Petal Pink Cardstock Card Base

4"  X  5 1/4" Very Vanilla Cardstock (= Card Front - Use Tufted Embossing Folder on it)

One 2" Cut Piece from your DSP

One Petal Pink Cardstock (Slightly larger than DSP) 

1/2" X 3" Petal Pink Cardstock

Scrap of Very Vanilla Cardstock (Stamp Sentiment & Punch with Classic Label Punch) Glue onto strip of Petal Pink and trim to match classic label vanilla piece.

To put card together (Follow Video Instruction)

You can add ribbon or a bow to card if desired and gems or pearls for added bling.

Card #3

8 1/2" X  5 1/2" Petal Pink Cardstock Card Base

4"  X  5 1/4" Very Vanilla Cardstock (= Card Front - Use Tufted Embossing Folder on it)

One 2 3/4" X  4 1/4"Cut Piece from your DSP

One Petal Pink Cardstock (Slightly larger than DSP) 

With Classic Label Punch - punch for sentiment (Watch video)

To put card together (Follow Video Instruction)

You can add ribbon, twine or a bow to card if desired and gems or pearls for added bling.

Card #4

8 1/2" X  5 1/2" Petal Pink Cardstock Card Base

4"  X  5 1/4" Very Vanilla Cardstock (= Card Front - Use Tufted Embossing Folder on it)

One 3" X  3"Cut Piece from your DSP (Using Square Stitched Shape Die cut DSP)

One Petal Pink Cardstock (Slightly larger than DSP - Using Layering Squares Die cut Scalloped edged slightly larger than DSP

3/8" X  5 1/4" Strip of Petal pink Cardstock (Stamp Sentiment on right side)

7" Very Vanilla Lace Adhere to middle and back of Very Vanilla Card Front

To put card together (Follow Video Instruction)

Add bow to card if desired and gems or pearls for added bling.

Card #5

8 1/2" X  5 1/2" Petal Pink Cardstock Card Base (Use Tufted EF on front)

One Diagonal Cut Piece from your DSP

One diagonal cut Petal Pink Cardstock (Slightly larger than DSP) 

Scrap of Very Vanilla Cardstock (Die cut or punch scalloped oval.

Scrap of Petal Pink Cardstock (Die Cut or punch oval  and stamp sentiment to layer with scallop above. Add to center top of card with Stampin Dimensionals

18 Ribbon - Add around left side of card and tie a bow

To put card together (Follow Video Instruction)

Add gems or pearls for added bling.

Card #6

8 1/2" X  5 1/2" Petal Pink Cardstock Card Base

4"  X  5 1/4" Very Vanilla Cardstock (= Card Front - Use Tufted Embossing Folder on it)

One 3" X  3"Cut Piece from your DSP (Using Square Stitched Shape Die cut DSP)

One Petal Pink Cardstock (Slightly larger than DSP - Using Layering Squares Die cut Scalloped edged slightly larger than DSP and one smaller scalloped square inside ..die cut to make a frame

3/8" X  5 1/4" Strip of Petal pink Cardstock 

Scrap of very vanilla and lovely label punch. Stamp sentiment in Sahara sand and add to 3/8" strip with stampin dimensonals

7" metalic petal pink ribbon (make a bow and add to the left of punched sentiment

3 petal pink pearls (place under sentiment)

Card #7

8 1/2" X  5 1/2" Petal Pink Cardstock Card Base

4"  X  5 1/4" Very Vanilla Cardstock (= Card Front - Use Tufted Embossing Folder on it)

One 2 3/4" X  4 1/4"Cut Piece from your DSP

One Petal Pink Cardstock (Slightly larger than DSP) 

2 - 1/8" X 4" strips of Petal Pink Cardstock plus 1/4" X 4" Strip of DSP in middle  (glue on the right hand side of card.

Stamp sentiment on Petal Pink Cardstock then punch out with Dual Banner Punch.

Add ribbon, bows and gems if desired.

Product List

146842	146667	145372	141706
146335	144237	146985	141491
147629	141672	102300	146288
147108	147104	147117	146927
146914	110755	103683	104332

Happy Mother's Day - Eclipse Card

I uploaded a one sheet wonder on Tuesday using Painted Harvest so I thought it would make a pretty eclipse card too. If you need the directions for the sunflower design check my March 13th Blog post or Video on YouTube.

How I made my Design with Painted Harvest

Card Tutorial

Measurements and Supplies

8 1/2" X 5 1/2" Thick Whisper White Card Stock

5 1/4" X 4"  Rich Razzleberry Card Stock

5" X 3 3/4" Painted Harvest Designed Paper

6" X 2 1/2" Painted Harvest Designed Paper (for envelope)

Large Letter Framelit Dies
Magnetic Platform for Big Shot
Big Shot

You're Inspiring Stamp Set

White Craft Foam

Liquid Glue

Fine Tip Glue Pen

Blushing Bride, Sweet Sugarplum, Crumb Cake, Choc Chip Ink Pads

Adhesive tape runner

Product List

144783	145808	140272	115316
143263	130658	141712	131172
141395	126975	126979	104332
138309	110755	133773	103579

Painted Harvest Set - One Sheet Wonder

I made these 12 cards from a 12" X 12" One Sheet Wonder that I stamped using Painted Harvest Stamp Set. It's sometimes fun to make your own Designer Series Paper (DSP). I used Blushing Bride, Sweet Sugarplum, Crumb Cake and Soft Suede Ink Pads for the sunflowers and Pear Pizzazz Ink Pad (stamped off once) for the leaves and then Sweet Sugarplum Ink Pad for the little dots to fill in around the card stock. There are 2 videos to watch. First is how i made the One Sheet Wonder Design and the 2nd one is cards I made using it.

How to make your own design using Painted Harvest

Then I cut it as template shows.

I did cut some of the pieces smaller or used them for sentiments etc.

All edges are sponged with Sweet Sugarplum Ink and all sentiments are stamped in the same Sweet Sugarplum. All cards are sprayed with a homemade glimmer Spray (Watch video if you want to make some)

Video Tutorial

Cards 1-4 

1. Upper Left- Embossed with layered leaves folder, I used a  2" x 5 /14" DSP with a blushing bride backing. I cut out an oval , stamped sentiment on the back and then die cut a larger oval scallop then cut another oval inside of that to make the frame. Popped up the DSP on dimensionals. Added silver bakers twine and a bow.

2. Upper Right- Embossed with layered leaves folder, I used a  2 1/2" x 4" DSP with a blushing bride backing. Popped DSP on dimensionals. Stamped the sentiment and punched out using the classic label punch, applied with glue dots to the silver bakers twine and bow.

3. Lower Left- Embossed with layered leaves folder. Use corner rounder or envelope punch board to round all corners on DSP and Backing. I used a  2 1/2" x 4" DSP with a blushing bride backing. Die cut circle and frame (same as card #1). Wrapped silver bakers twine 3 times and added a bow. Popped DSP up on dimensionals.

4. Lower right-I used the sponge brayer with sweet sugarplum ink for an ombre effect. Die cut scalloped square in blushing bride, square in sweet sugarplum and DSP in stitched square and placed on an angle with adhesive. Then added 3 small pearls under the sentiment.

Cards 5-8

5.  Upper Left- (Watch video for this one).

6. Upper Right- Gate fold card (8 1/2 X 5 1/2" card stock, scored at 2 1/8" on both ends). Inside is blushing bride card stock. Embossed both front openings with flowered petal pair folder. Layered DSP on blushing bride and placed on left side (with the adhesive only the left side) , Stamped and cut out sentiment with punch and added a couple of pearls.

7. Lower Left- Fold back 1 1/4" of cardfront, emboss with layered leaves folder. Sponge brayer the left portion of the card with sweet sugarplum ink. Cut your DSP into a square add backing, punch 1/8" hole on top and bottom of (Square angled like a triangle) triangle. Thread silver bakers twine and glue to back of embossed 1 1/4" add a bow.  Adhere layered leaves embossed part down. Stamp sentiment on inside of card.

8. Lower Right- Emboss with flowered petal pair folder at top and bottom of card. Cut rectangle frame from in blushing bride (use square die, run through once, move to second position and line up with first cut add a bit of washi tape to hold die in place, run through big shot again) add a bow of silver bakers twine, add 3 pearls above sentiment.

Cards 9-12

9. Upper Left- Emboss with layered leaves embossing folder. Use a sponge brayer with sweet sugarplum ink on leaves. Cut oval and framed oval cut out (like card #1). Stamp sentiment and glue in place on blushing bride card stock. Add silver bakers twine 3 times around DSP and add your bow. Pop up on dimensionals and place on card

10. Upper Right- Emboss both left and right of card front with flowered petal pair. Sponge with sweet sugarplum with brayer. Cut 1 1/2" X 4" DSP and glue in center. Using washi tape mask your stamp to get the 3 separate parts of the sentiment. Add backing and adhere to card. 

11. Lower Left- Similar to card #3 except only round two of the corners.

12. Lower Right- emboss with layered leaves folder. Punch out space for sentiment on DSP using classic label punch. Glue sentiment in place on blushing bride card stock, wrap silver bakers twine twice on an angle on DSP add dimensionals and place on backing so you can see the sentiment below.

You can use any stamp set and design your own DSP, it's fun, give it a try. Use what you have available, if you don't have this stamp set or embossing folders or punches substitute with what you do have. That is unless i've shown you something you just gotta have :) you can purchase by clicking the links below or visiting my website and clicking on SHOP NOW to visit my Stampin" Up Store.

(www.astampingnana.com)

If you have any questions feel free to contact me by clicking the contact me button on my website too.

Product List

144783	145808	100730	131198
143704	145656	145372	141705
141706	141491	131172	141395
131180	126975	126978	104332
104430	145569	144219	143263